Feeding Equipment
Inertial Vibrating Feeder
Xinhai's inertial vibrating feeder transfers bulk ore from hoppers to crushers or screens. It mounts between the bin and the first processing stage, providing a steady, adjustable flow. Twin vibration motors drive the trough directly.
Technical parameters
The feeder handles many ore types and particle sizes. Its bolted frame eases maintenance in remote sites. Compared with electromagnetic feeders, it generates higher drive force for larger troughs.
The parameter table spans 28 models. The model code, such as GZG400-4, indicates the trough width in millimetres and the number of vibration motors. Buyers should compare feed chute dimensions, capacity, and permissible particle size to match the feeder to the ore stream and bin geometry. Installation weight and power draw rise with trough size.
| Model | Feed Chute Dimensions (mm) | Feed Capacity (t/h) | Maximum Feed Size (mm) | Vibration Frequency (Times/min) | Double Amplitude (mm) | Rated Voltage (V) | Rated Current (A) | Power Frequency (Hz ) | Power (kW) | Weight (kg) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Level | -10° | ||||||||||
| GZG400-4 | 400×1000×200 | 30 | 40 | 100 | 1450 | 4 | 380 | 2×0.73 | 50 | 2×0.25 | 171 |
| GZG500-4 | 500×1000×200 | 60 | 85 | 150 | 4 | 2×0.73 | 2×0.25 | 202 | |||
| GZG600-4 | 630×1250×250 | 110 | 150 | 200 | 4 | 2×1.53 | 2×0.55 | 379 | |||
| GZG700-4 | 700×1029×250 | 120 | 170 | 200 | 4 | 2×1.53 | 2×0.55 | 389 | |||
| GZG800-4 | 800×1500×250 | 160 | 230 | 250 | 4 | 2×1.95 | 2×0.75 | 563 | |||
| GZG900-4 | 900×1483×250 | 180 | 250 | 250 | 4 | 2×1.95 | 2×0.75 | 613 | |||
| GZG1000-4 | 1000×1750×250 | 270 | 380 | 300 | 4 | 2×2.71 | 2×1.1 | 762 | |||
| GZG1100-4 | 1100×1673×250 | 300 | 420 | 300 | 4 | 2×2.71 | 2×1.1 | 854 | |||
| GZG1250-4 | 1250×2000×315 | 460 | 650 | 350 | 4 | 2×3.51 | 2×1.5 | 1099 | |||
| GZG1300-4 | 1300×2040×300 | 480 | 670 | 350 | 4 | 2×3.51 | 2×1.5 | 1117 | |||
| GZG1500-4 | 1500×2250×300 | 720 | 1000 | 500 | 3.5 | 2×5.19 | 2×2.2 | 1477 | |||
| GZG1600-4 | 1600×2500×315 | 770 | 1100 | 500 | 4 | 2×6.82 | 2×3.0 | 1555 | |||
| GZG1800-4 | 1800×2325×375 | 900 | 1200 | 500 | 3 | 2×6.82 | 2×3.0 | 2350 | |||
| GZG2000-4 | 2000×3000×400 | 1000 | 1400 | 500 | 2.5 | 2×6.82 | 2×3.0 | 2705 | |||
| GZG700-6 | 700×1029×250 | 130 | 180 | 200 | 960 | 5 | 2×1.66 | 2×0.55 | 385 | ||
| GZG800-6 | 800×1500×250 | 170 | 250 | 250 | 5 | 2×1.66 | 2×0.55 | 510 | |||
| GZG900-6 | 900×1483×250 | 200 | 270 | 250 | 5 | 2×1.66 | 2×0.55 | 561 | |||
| GZG1000-6 | 1000×1750×250 | 290 | 410 | 300 | 5 | 2×2.14 | 2×0.75 | 652 | |||
| GZG1100-6 | 1100×1673×250 | 320 | 450 | 300 | 5 | 2×2.97 | 2×1.1 | 795 | |||
| GZG1250-6 | 1250×25000×315 | 500 | 700 | 350 | 5 | 2×2.97 | 2×1.1 | 1002 | |||
| GZG1300-6 | 1300×2040×300 | 520 | 720 | 350 | 5 | 22×3.84 | 2×1.5 | 1070 | |||
| GZG1500-6 | 1500×2250×300 | 780 | 1080 | 500 | 5 | 2×5.55 | 2×2.2 | 1414 | |||
| GZG1600-6 | 1600×2500×315 | 830 | 1190 | 500 | 5 | 2×5.55 | 2×2.2 | 1720 | |||
| GZG1800-6 | 1800×2325×375 | 970 | 1320 | 500 | 5 | 2×7.28 | 2×3.0 | 2288 | |||
| GZG2000-6 | 2000×3000×400 | 1000 | 1400 | 600 | 4 | 2×12 | 2×4 | 2705 | |||
| GZG2200-6 | 2200×3400×500 | 1200 | 1550 | 700 | 5 | 2×18 | 2×5.5 | 6541 | |||
| GZG2400-6 | 2400×3700×600 | 1400 | 1700 | 700 | 5 | 2×18 | 2×5.5 | 7600 |
Standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Use them to shortlist, then confirm the duty by testwork, flowsheet calculation and a written confirmation from the manufacturer.
What decides the selection
Before selecting a model, define the material’s bulk density, maximum lump size, and abrasiveness. Specify the required feed rate range and the bin outlet geometry. High moisture or clay content can influence trough slope and liner choice. Work with Xinhai’s application engineers to review the duty and select the appropriate drive configuration.
- Maximum lump size
- Bulk density
- Moisture and stickiness
- Feed capacity
- Speed adjustment range
- Bin pressure
- Wear resistance
- Fluctuation tolerated by downstream equipment
Other feeding machines
- Chute Feeder5 models
- Bar Vibrating Feeder6 models
- Heavy Duty Plate Feeder26 models
- Electromagnetic Vibrating Feeder12 models
- Pendulum Feeder3 models
- Belt Feeder43 models
- Disc Feeder27 models
ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory
Send the duty, get a sized proposal
Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.